China OEM Hot Forging Excavator/Bulldozer/Conveyer Track Chain duplex roller chain

Product Description

OEM Hot Forging Excavator/Bulldozer/Conveyor Keep track of Chain 
 

Observe backlinks Kinds for:
D4D, D6D, D7G, E70, E120, E180, E200, E240, E300, E325, E330, E450, 
For Komatsu: D75, D60, D50, D155, D80, D85, D155, 20HT,PC60, PC100, PC120, PC150, PC200,
PC220, PC230, PC300, PC400, PW100,
For Hitachi: UH07, UH10, UH14, EX100, EX120, EX150, EX160, EX200, EX220, EX300, EX400,
ZAXIS210
For Kobelco: SK07, SK60, SK100, SK120, SK200, SK220, SK230, SK300, SK09, DK907, SK912,
For Daewoo: DH200, DH220, DH280, DH300, DH320, DH330, DH55
For Kato: HD250, HD400, HD450, HD510, HD550, HD650, HD700, HD770, HD800, HD820, HD850, HD880, HD900, HD1200, HD1250, HD1430, HD1880
For Hyundai: R200, R210, R220
For Sumitomo: SH60, SH100, SH120, SH200, SH220, SH300, LS580, LS1600, LS2600, LS2650, LS2800,
LS3400, LS4300
For Mitsubishi: MS180, MS230, MS240, MS380
        Keep track of Roller,Prime roller, idler,sprocket for pursuing varieties:
        For Komatsu:
        D20,D30,D31,D31-eighteen,D40,D50,D60,D65,D75,D75s-2-3-5,D80,D80-7,D80-twelve,D80A-12,D80A-eighteen,
        D80-18,D85A-eighteen,D85,D86,D87,D90,D150A-1,D155-1,D155A-1,ED3,PC30,PC35,PC40,PC60,
        PC60-1/3/5/6/7,PC90,PC100,PC100-3/5/6/7,PC120-3/5,PC130,PC200,PC200-1/2/3/5/6/7,
        PC200-3/5,200B,PC200-6,PC210,PC220-1/3/5/6,PC270,PC300,PC300-1/3/5/6/7,PC400,
        PC400-3/5/6,PC650

        D4, D4D ,D5,D6D,D6c,D7f,D7G,D8K,E70B,110B,120B, one hundred eighty,200B,211,215C,235C,240B,
        three hundred,300L,300B,307,315/320, 320A,320B,320C, 322,325,330, 240,240B(MS180), 312,450

        For Hitachi:
        EX60,EX100,EX100-1/2/3/5,EX120,EX150,EX150-1,EX200-1/2/3/5,EX220,EX220-1/2/3/5,EX250,
        EX300,EX300-1/2/3/5,EX330-3,EX350,EX400,EX400-1/3/5,UH05,UH043,UH063,UH07,UH07-5/7,
        UH08,ZAXIS55,ZAXIS70,ZAXIS120,ZAXIS200,ZAXIS210,ZAXIS230,ZAXIS240,ZAXIS270,
        ZAXIS330,ZAXIS360,ZAXIS450

        For Kato:
        HD220,HD250,HD400,HD450,HD550G,HD550-3/5/7,HD650,HD700, HD700-2/5/7,HD770,
        HD770-2/5/7,HD800,HD820,HD850,HD880,HD900,HD1571,HD1200,HD1220, HD1250,
        HD1225-1,HD1250-5/7,HD1430,HD1800SE,HD1880, LS2800FJ

        For Hyundai:
        R55,R60,R80,a hundred and ten-7,130,one hundred seventy,180LC-3,one hundred ninety,two hundred,200LC-3,210LC-3,215,220LC-5,
        225,280LC,290LC,305,320LC,335,450

 

         Track chain is employed for types as under:
         track chain utilised, for Komatsu, for Hitachi, for Kolbeco, for Daewoo, for Kato, for Daewoo, for
         Hyundai, for Sumitomo, for CZPT and so forth.
 

Materials 40Mn2 35MnBH Part No. PC40 PC45 PC120 EX90 EX100 CAT215 CAT225
Color Yellow or Customer Required Symbol Yassian or Customer Necessary
MOQ one laptop Packing Plywood Pallet
Supply time 25-30 days (a single container) Suited machine Komatsu, JCB …
Guarantee 24 months Loading port HangZhou ZheJiang HangZhou HangZhou …
Certificates ISO9001: 2015, SGS Payment Ali Trade Assurance T/T L/C Western Union …

Applicable Design Applicable Product Relevant Design Applicable Product
D355A-five D80AE/F/P-eighteen, D85AE/P-18/21   D60, D65, TY165, SD16  EX200-one
D275A-five D80, D85, D7G  DH280, DH320, DH280LC
22.5 UH09 UH10/12/12LC 
D40A, D45A, D50A 
D155A-1/2, TY320, SD32  D7E/F, 977L PC280LC PC290LC-six
22.5 800 PC300-3/5 PC300LC-3/5 
EX100, EX120, R912LC 
 D155A-1/2, TY320, SD32 D7G, 973, 977L, D80, D85   CAT325 325B 325BL
800 325L 325N
TS90, T100, CLGB110 
 D8H, 983, D8K  PC300-6/7, EX300-five DH280 DH320 DH280LC
UH09 UH10/twelve/12LC 
 R941-1/2, R941B, CK90
 D8H, 583H, D8K CAT330, SK330   EX200-1/3/five
20.5 seven-hundred 800 EX200LC-2/3/5 DH220LC
 SK100, SK120
 PC400-6/seven  PC400-1/3/5 PC220-5/6/7,
PC220LC-3/5/6, PC230
20.5, PC240-3/5/6 
 PC100-5/6, PC120-5/six
T180 T200 EX400-3/5  953, 953B, D5B, D561C/D   TH100
D7G, 973 PC360LC-1/3/5, PC400-3/5   953, 953B  PD140TJ

        1. Q: Why decide on the CZPT item?
        A: We CZPT have our personal plant– HangZhou CZPT Equipment Co., Ltd, therefore,
        we can surely assure the top quality of each and every merchandise and supply you with comparable value.

        2. Q: Do you offer OEM Support?
        A: Of course, we provide OEM Support.

        3. Q: Do you supply personalized products?
        A: Sure. Consumers give us drawings and requirements, and we will manufact accordingly.

        4. Q: What is your payment term?
        A: We offer kinds of payment terms such as L/C, T/T, Paypal, Escrow, and many others.
       
        If there is something you are demanding or interested, make sure you really feel free to contact with
        us, we will opinions inside 12 hrs.

 

US $0.1-3
/ Piece
|
1,000 Pieces

(Min. Order)

###

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Iron
Surface Treatment: Electroplating
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Material 40Mn2; 35MnBH Part No. PC40; PC45; PC120; EX90; EX100; CAT215; CAT225
Color Yellow or Customer Required Logo Yassian or Customer Required
MOQ 1 pc Packing Plywood Pallet
Delivery time 25-30 days (one container) Suitable machine Komatsu, JCB …
Warranty 24 months Loading port Ningbo; Shanghai; Yiwu; Guangzhou …
Certificates ISO9001: 2015, SGS Payment Ali Trade Assurance; T/T; L/C; Western Union …

###

Applicable Model Applicable Model Applicable Model Applicable Model
D355A-5 D80AE/F/P-18, D85AE/P-18/21   D60, D65, TY165, SD16  EX200-1
D275A-5 D80, D85, D7G  DH280, DH320, DH280LC
22.5 UH09 UH10/12/12LC 
D40A, D45A, D50A 
D155A-1/2, TY320, SD32  D7E/F, 977L PC280LC PC290LC-6
22.5 800 PC300-3/5 PC300LC-3/5 
EX100, EX120, R912LC 
 D155A-1/2, TY320, SD32 D7G, 973, 977L, D80, D85   CAT325 325B 325BL
800 325L 325N
TS90, T100, CLGB110 
 D8H, 983, D8K  PC300-6/7, EX300-5 DH280 DH320 DH280LC
UH09 UH10/12/12LC 
 R941-1/2, R941B, CK90
 D8H, 583H, D8K CAT330, SK330   EX200-1/3/5
20.5 700 800 EX200LC-2/3/5 DH220LC
 SK100, SK120
 PC400-6/7  PC400-1/3/5 PC220-5/6/7,
PC220LC-3/5/6, PC230
20.5, PC240-3/5/6 
 PC100-5/6, PC120-5/6
T180 T200 EX400-3/5  953, 953B, D5B, D561C/D   TH100
D7G, 973 PC360LC-1/3/5, PC400-3/5   953, 953B  PD140TJ
US $0.1-3
/ Piece
|
1,000 Pieces

(Min. Order)

###

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Iron
Surface Treatment: Electroplating
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Material 40Mn2; 35MnBH Part No. PC40; PC45; PC120; EX90; EX100; CAT215; CAT225
Color Yellow or Customer Required Logo Yassian or Customer Required
MOQ 1 pc Packing Plywood Pallet
Delivery time 25-30 days (one container) Suitable machine Komatsu, JCB …
Warranty 24 months Loading port Ningbo; Shanghai; Yiwu; Guangzhou …
Certificates ISO9001: 2015, SGS Payment Ali Trade Assurance; T/T; L/C; Western Union …

###

Applicable Model Applicable Model Applicable Model Applicable Model
D355A-5 D80AE/F/P-18, D85AE/P-18/21   D60, D65, TY165, SD16  EX200-1
D275A-5 D80, D85, D7G  DH280, DH320, DH280LC
22.5 UH09 UH10/12/12LC 
D40A, D45A, D50A 
D155A-1/2, TY320, SD32  D7E/F, 977L PC280LC PC290LC-6
22.5 800 PC300-3/5 PC300LC-3/5 
EX100, EX120, R912LC 
 D155A-1/2, TY320, SD32 D7G, 973, 977L, D80, D85   CAT325 325B 325BL
800 325L 325N
TS90, T100, CLGB110 
 D8H, 983, D8K  PC300-6/7, EX300-5 DH280 DH320 DH280LC
UH09 UH10/12/12LC 
 R941-1/2, R941B, CK90
 D8H, 583H, D8K CAT330, SK330   EX200-1/3/5
20.5 700 800 EX200LC-2/3/5 DH220LC
 SK100, SK120
 PC400-6/7  PC400-1/3/5 PC220-5/6/7,
PC220LC-3/5/6, PC230
20.5, PC240-3/5/6 
 PC100-5/6, PC120-5/6
T180 T200 EX400-3/5  953, 953B, D5B, D561C/D   TH100
D7G, 973 PC360LC-1/3/5, PC400-3/5   953, 953B  PD140TJ

Roller Chain Basics

Before choosing the right roller chain for your machine, it is necessary to learn some basics. Learn about sprockets, tensile strength, pitch, and width. Read this article to learn more. It will help you make an informed decision. Getting the right product is critical, but it’s not always as simple as choosing a brand name. You need to choose a company that supports its products and provides good service.
chain

Roller sprocket

If you are planning to purchase roller sprockets for your application, you should first look at the various types available. Sprockets available for single-strand roller chains are manufactured by Boston Steel – Type B sprockets are drilled to size. They are available in 1/4, 3/8, 1/2, 5/8, 3/4 and 1″ pitch sizes.
The diameter of the sprocket is important when choosing the right sprocket for your application. Using a caliper to measure the diameter of a toothless plate is a good way to determine the exact size of the sprocket. A caliper is the diameter of a plate without teeth. On Type B and C sprockets, the hub diameter measures the thickness of the hub.
Another type of sprocket is the steel split sprocket, which is split in diameter. This type is easy to install and remove, and is held together by bolts in the hub. Typically, split sprockets have chain pitches ranging from 40 to 240 and bores ranging from 3/4″ to 6″. The split sprockets are designed with one pointing towards the ceiling and the other two parallel to the floor.
When shopping for sprockets, it is important to remember that they are designed specifically for a specific chain. All chains are manufactured to specific standards. In the United States, the most common standard is ANSI. The chain pitch is the distance between the center of each pin and the center of the next pin. In the US, the standard is always measured in eight-inch intervals.
In addition to sprocket size, sprocket pitch and the surface area also affect chain life. Unlike belt sprockets, which are made of forged steel, the teeth on roller sprockets are stamped from steel sheet or pressed from powdered metal. The harder the teeth, the longer the chain will last.

Roller chain pitch

The pitch of a roller chain is the distance between the sprocket and the pin. The smaller the thread pitch, the smaller the bushing wear. Generally speaking, the smaller the pitch, the longer the life of the chain. For best performance and longest life, manufacturers recommend a minimum chain pitch of 2% to 3%. Chain pitch is important to ensure proper performance, and the manufacturer recommends that you replace the chain when it reaches 2% to 3% of normal.
To determine the correct chain pitch for a particular chain, first determine the sprocket size and pitch. Pitch is the distance between pin centers, measured in 1/8 inch increments. The pin diameter of the chain is also important. If you’re not sure about the pin diameter of your chain, measure a few links to get a good average reading. Alternatively, use a caliper to measure the inside diameter of the sprocket and count the number of teeth.
When sizing a sprocket, measure the chain between the gears with a caliper and compare it to the measurements on the chain size chart. Make sure you have checked all the specs and checked the correct chain pitch. Then, choose the correct chain pitch for your needs. This is a critical step in choosing the right chain. So get the correct pitch for your roller chain. Correct pitch helps ensure maximum performance and safety.
To identify a specific type of roller chain, measure its tensile strength. This represents the amount of load the chain can withstand before breaking. Another key parameter to consider is fatigue strength. Chains with high fatigue strength are more resistant to rust and wear than chains with low fatigue strength. The numbers on the right in the standard numbering represent normal or light duty chains, while the numbers on the left represent the pitch of heavy-duty chains.
Double pitch roller chains are a variant of single pitch chains. They are manufactured according to ISO 606 and meet the same standards as single pitch chains. They are mainly used in applications with lower requirements for speed and power transmission. The plates of double pitch roller chains are also longer than single pitch chains. The double pitch drive series is also used for elevator and long conveyor drives. There are three main types of roller chains: single-pitch chains, double-pitch carriers, and oversized rollers.

Roller chain width

When buying a roller chain, one of the first decisions you must make is its width. To make this determination, you need to measure the overall width of the chain, the diameter, and the width of each roller. You must also know the height and thickness of the board. After taking these measurements, you can start shopping for the perfect roller chain. But before you buy a new chain, it’s important to know what to expect from the chain itself.
There are many different types of roller chains. These chains are available for ANSI and metric measurements. They come in single-stranded and double-stranded variants. They are usually used for power transmission. Other types include agricultural, automotive, conveyor, multi-strand, and four-strand chains. These charts also include a chart so you can easily see the exact size you need. Listed below are some of the benefits of buying a roller chain.
Roller diameter and pin diameter are important factors in choosing the correct chain width. The width of the chain is the nearest binary fraction of 5/8 of an inch. It should be at least half the thickness of the sprocket, and the plate thickness is one-eighth the width of the chain. Overweight chains are indicated with the suffix H. The pitch and width of the chain are determined by the working load and machine speed.
The outer links of the roller chain are called pin links. These pins are inserted into the bushings of the adjacent roller links. They are held in place by cotter pins. Pin links are usually pressed into the pins of heavy-duty chains. These pins are used to hold the rollers in place. However, these pin chains can reduce the power rating of roller chains by up to 20%.
The ANSI 29.1 Steel Chain Specification specifies a minimum pitch in inches and ultimate strength of 12,500 x pitch in inches. At the same time, the O-ring chain greatly reduces wear due to its lubricating effect. O-ring and X-ring chains contain a lubricant injected by vacuum when riveting the chain together. Transmission chains are tested and governed by standards bodies such as ANSI. In 2011, the American Society of Mechanical Engineers developed a standard for precision power transmission chains.
chain

Roller chain tensile strength

One of the most important indicators of roller chain strength is tensile strength. This measurement refers to the amount of load the chain can withstand before breaking. Another measure, called fatigue strength, refers to the maximum load a chain can withstand before it breaks. The strength of a roller chain depends on its size, the quality of the steel used in its construction, and the heat treatment. There are also differences in the types of shot peening used to treat steel, pitch holes, and link plates.
When choosing a roller chain, the workload is critical. This is the maximum load the chain can withstand before fatigue failure occurs. This measurement is critical because it helps determine the type of load applied to the chain. When deciding which roller chain to buy, be sure to consider the mechanical type and desired strength. Then, make sure it meets strength and load-carrying capacity requirements.
The ultimate tensile strength of a roller chain is based on the manufacturer’s recommended maximum tensile strength. However, the actual tensile strength may be higher or lower than this value. The working load limit of a roller chain can also be calculated by multiplying the chain diameter by the grade. The working load limit of a chain is the highest tension it can withstand before breaking. This value is usually expressed in points.
The maximum tensile strength of roller chains varies by chain type. The single-strand heavy chain has thick side plates for higher shock loads. Single strand heavy-duty roller chains, also known as “bushing” roller chains, are also available. Double-stranded heavy chains are structurally similar, but they have two layers of steel connected by pins that are nearly twice as strong as standard roller chains.
The tensile strength of a single-strand roller chain is approximately 500 tons. In comparison, a single-chain blockchain has a tensile strength of 900. The tensile strength of the two is similar, and it is not recommended to choose one or the other. Although steel and titanium chains are considered the strongest materials for roller chains, these materials are not magnetic.

China OEM Hot Forging Excavator/Bulldozer/Conveyer Track Chain     duplex roller chainChina OEM Hot Forging Excavator/Bulldozer/Conveyer Track Chain     duplex roller chain
editor by czh 2022-12-23